Bond Coater with Joint Sealer
)
)
)
)
)
)
Used in asphalt pavement construction to both apply the bond coat between each layer of asphalt and to seal the joints /edges of the asphalt safely.
Bond coater tank Capacity: Options available from 2000L to 18000L litres.
Bitumen edge sealer rank capacity: 500L
Spray bar options:
-
2.4m fixed width
-
Telescopic overall width 4.2m
-
Telescopic overall width 5m
Bitumen Joint / Edge Sealer – option of single or double spray bars
In cab controls: Touch screen display allowing operator to enter desired spread rate with full job print out for quality control and traceability.
Automatic Pressure and Rate Control
Load Sensing proportional hydraulic system.
Automatic heating: Oil burner heating with option of overnight heating.
Pumping: Positive displacement Bitumen pump with integral relief valve with output of up to 800 litres per minute is fitted.
Spraying: Spray bar fitted with slot jets at 150mm centres giving triple overlap of emulsion, jets automatically open/close as the spraying width varies and pressure is automatically controlled to remain constant.
Bond coater tank: Fabricated from mild steel to maximum section incorporating anti-surge baffles and heating flue. Insulated with 100mm dense rockwool matting and clad with Aluminium sheeting.
Edge sealer: A melting tank is immersed in a hot oil heating system with an in-tank heating grid and product agitator. The tank is insulated and clad. Joint – Edge sealing is by triple spray jet assembly and controlled from within the drivers cab.
All incorporated safety systems meet the highest European Safety standards.
Categories
- Bitumen and emulsion sprayers
- Chip spreaders
- Rail wagons/services
- Bitumen storage systems/equipment
